Humminbird 141c Manuel d'utilisateur télécharger pdf (Page 49)

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline

or boat's keel. Enter a positive vertical measurement from the transducer to the

waterline to read the depth from the waterline. Enter a negative vertical measurement

from the transducer to keel to read the depth from the keel. This menu choice is

available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Depth Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Offset setting.

(-10.0 to +10.0 feet or -3 to 3 meters [International Models only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu

choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode).

To change the Temp Offset setting:

1. Make sure you are in Advanced User Mode, then highlight Temp Offset on the

Setup menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Temp Offset

setting. (-10.0 to +10.0 degrees, Default = 0)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

Pas de commentaire

Humminbird 141c Manuel d'utilisateur Page 49